| | |
| |
- Peer influence is enough to ensure that only relevant content is posted.
- Peer editing - the ability for anyone to rearrange all content on a page - keeps topics focused.
- In TWiki, content is transparently preserved under revision control:
|
|
<
< | |
>
> | |
| |
-
- Users are encouraged to edit and refactor (condense a long topic), since there's a safety net.
As a collaboration guideline:
- Create broad-based Groups (for more and varied input), and...
|
| |
Managing Groups |
|
<
< | Groups are defined by group topics located in the Main web, such as the TWikiAdminGroup. To create a new group, visit TWikiGroups and enter the name of the new group ending in Group into the "new group" form field. This will create a new group topic with two important settings: |
>
> | The following describes the standard TWiki support for groups. Your local TWiki may have an alternate group mapping manager installed. Check with your TWiki administrator if you are in doubt.
Groups are defined by group topics located in the Main web. To create a new group, visit TWikiGroups and enter the name of the new group ending in Group into the "new group" form field. This will create a new group topic with two important settings: |
| |
-
Set GROUP = < list of Users and/or Groups >
-
Set ALLOWTOPICCHANGE = < list of Users and/or Groups >
The GROUP setting is a comma-separated list of users and/or other groups. Example:
-
Set GROUP = Main.SomeUser, Main.OtherUser, Main.SomeGroup
|
|
<
< | The ALLOWTOPICCHANGE setting defines who is allowed to change the group topic; it is a comma delimited list of users and groups. You typically want to restrict that to the members of the group itself, so it should contain the name of the topic. This prevents users not in the group from editing the topic to give themselves or others access. For example, for the TWikiAdminGroup topic write:
-
Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup
|
>
> | The ALLOWTOPICCHANGE setting defines who is allowed to change the group topic; it is a comma delimited list of users and groups. You typically want to restrict that to the members of the group itself, so it should contain the name of the topic. This prevents users not in the group from editing the topic to give themselves or others access. For example, for the KasabianGroup topic write:
-
Set ALLOWTOPICCHANGE = Main.KasabianGroup
|
| |  Note: TWiki has strict formatting rules. Make sure you have three spaces, an asterisk, and an extra space in front of any access control rule.
The Super Admin Group |
|
<
< | By mistyping a user or group name in the settings, it's possible to lock a topic so that no-one can edit it from a browser. To avoid this, add the WikiNames of registered administrators to the super admin group topic called TWikiAdminGroup. The name of this topic is defined by the {SuperAdminGroup} configure setting. Example group setting: |
>
> | A number of TWiki functions (for example, renaming webs) are only available to administrators. Administrators are simply users who belong to the SuperAdminGroup. This is a standard user group, the name of which is defined by {SuperAdminGroup} setting in configure. The default name of this group is the TWikiAdminGroup. The system administrator may have chosen a different name for this group if your local TWiki uses an alternate group mapping manager but for simplicity we will use the default name TWikiAdminGroup in the rest of this topic.
You can create new administrators simply by adding them to the TWikiAdminGroup topic. For example, |
| |
-
Set GROUP= Main.ElizabethWindsor, Main.TonyBlair
|
|
>
> | A member of the Super Admin Group has unrestricted access throughout the TWiki, so only trusted staff should be added to this group. |
| | Restricting Access |
| |
- Restricting VIEW blocks viewing and searching of content.
- Restricting CHANGE blocks creating new topics, changing topics or attaching files.
|
|
>
> |
- Restricting RENAME prevents renaming of topics within a web.
Note that there is an important distinction between CHANGE access and RENAME access. A user can CHANGE a topic, but thanks to version control their changes cannot be lost (the history of the topic before the change is recorded). However if a topic or web is renamed, that history may be lost. Typically a site will only give RENAME access to administrators and content owners. |
| | Controlling access to a Web |
| |
-
-
Set ALLOWWEBVIEW = < comma-delimited list of Users and Groups >
-
Set DENYWEBCHANGE = < comma-delimited list of Users and Groups >
-
Set ALLOWWEBCHANGE = < comma-delimited list of Users and Groups >
|
|
>
> |
-
-
Set DENYWEBRENAME = < comma-delimited list of Users and Groups >
-
Set ALLOWWEBRENAME = < comma-delimited list of Users and Groups >
|
| | |
|
<
< | Be careful with empty values for any of these. In older versions of TWiki,
meant the same as not setting it at all. However since TWiki Dakar release, it means allow noone access i.e. prevent anyone from viewing the web. Similarly
now means do not deny anyone the right to view this web. See "How TWiki evaluates ALLOW/DENY settings" below for more on this. |
>
> | If your site allows hierarchical webs, then access to sub-webs is determined from the access controls of the parent web, plus the access controls in the sub-web. So, if the parent web has ALLOWWEBVIEW set, this will also apply to the subweb.
Creation and renaming of sub-webs is controlled by the WEBCHANGE setting on the parent web (or ROOTCHANGE for root webs). Renaming is additionally restricted by the setting of WEBRENAME in the web itself.
Note: For Web level access rights Setting any of these settings to an empty value has the same effect as not setting them at all. Please note that the documentation of TWiki 4.0 and earlier versions of TWiki 4.1 did not reflect the actual implementation, e.g. an empty ALLOWWEBVIEW does not prevent anyone from viewing the web, and an an empty DENYWEBVIEW does not allow all to view the web. |
| | Controlling access to a Topic |
| |
-
-
Set ALLOWTOPICVIEW = < comma-delimited list of Users and Groups >
-
Set DENYTOPICCHANGE = < comma-delimited list of Users and Groups >
-
Set ALLOWTOPICCHANGE = < comma-delimited list of Users and Groups >
|
|
>
> |
-
-
Set DENYTOPICRENAME = < comma-delimited list of Users and Groups >
-
Set ALLOWTOPICRENAME = < comma-delimited list of Users and Groups >
|
| | Remember when opening up access to specific topics within a restricted web that other topics in the web - for example, the WebLeftBar - may also be accessed when viewing the topics. The message you get when you are denied access should tell you what topic you were not permitted to access. |
|
<
< | Be careful with empty values for any of these. In older versions of TWiki,
meant the same as not setting it at all. However since TWiki Dakar release, it means allow no-one access i.e. prevent anyone from viewing the topic. Similarly
now means do not deny anyone the right to view this topic. See "How TWiki evaluates ALLOW/DENY settings" below for more on this. |
>
> | Be careful with empty values for any of these.
-
Set ALLOWTOPICVIEW =
This means the same as not setting it at all. (This was documented wrong in versions 4.0.X, 4.1.0 and 4.1.1)
-
Set DENYTOPICVIEW =
Since TWiki 4.0 this means do not deny anyone the right to view this topic. If DENYTOPICVIEW is set to an empty value anyone has access even if ALLOWTOPICVIEW or ALLOWWEBVIEW is defined. This allows to have very restrictive default access rights to an entire web and still allow individual topics to have more open access.
The same rules apply to ALLOWTOPICCHANGE/DENYTOPICCHANGE and APPLYTOPICRENAME/DENYTOPICRENAME. Setting ALLOWTOPICCHANGE or ALLOWTOPICRENAME to en empty value means the same as not defining it. Setting DENYTOPICCHANGE or DENYTOPICRENAME to an empty value means that anyone can edit or rename the topic.
The setting to an empty has caused confusion and great debate and it has been decided that the empty setting syntax will be replaced by something which is easier to understand in the 4.2 version of TWiki. A method to upgrade will be provided. Please read the release notes carefully when you upgrade.
See "How TWiki evaluates ALLOW/DENY settings" below for more on how ALLOW and DENY interacts. |
| | Controlling access to Attachments |
| | Note: Images embedded in topics will load much slower since each image will be delivered by the viewfile script. |
|
<
< | Controlling who can create top-level webs |
>
> |
Controlling who can manage top-level webs |
| | Top level webs are a special case, because they don't have a parent web with a WebPreferences. So there has to be a special control just for the root level.
- You can define these settings in the Main.%TWIKIPREFSTOPIC% topic, preferable towards the end of the topic:
-
Set DENYROOTCHANGE = < comma-delimited list of Users and Groups >
|
| | How TWiki evaluates ALLOW/DENY settings |
|
<
< | When deciding whether to grant access, TWiki evaluates the following rules in order (read from the top of the list; if the logic arrives at PERMITTED or DENIED that applies immediately and no more rules are applied). You need to read the rules bearing in mind that VIEW and CHANGE access may be granted/denied separately.
- If the user is a super-user
|
>
> | When deciding whether to grant access, TWiki evaluates the following rules in order (read from the top of the list; if the logic arrives at PERMITTED or DENIED that applies immediately and no more rules are applied). You need to read the rules bearing in mind that VIEW, CHANGE and RENAME access may be granted/denied separately.
- If the user is an administrator
|
| |
- If DENYTOPIC is set to a list of wikinames
- people in the list will be DENIED.
- If DENYTOPIC is set to empty ( i.e. Set DENYTOPIC = )
|
|
<
< |
-
- access is PERMITTED i.e no-one is denied access to this topic
|
>
> |
-
- access is PERMITTED i.e no-one is denied access to this topic.
Attention: Use this with caution. This is deprecated and will likely change in the next release.
|
| |
- If ALLOWTOPIC is set
- people in the list are PERMITTED
- everyone else is DENIED
|
|
<
< |
-
-
- Note that this means that setting ALLOWTOPIC to empty denies access to everyone except admins (unless DENYTOPIC is also set to empty, as described above)
- If DENYWEB is set to a list of wikiname
|
>
> |
- If DENYWEB is set to a list of wikinames
|
| |
-
- people in the list are DENIED access
- If ALLOWWEB is set to a list of wikinames
- people in the list will be PERMITTED
- everyone else will be DENIED
|
|
<
< |
-
-
- Note that setting ALLOWWEB to empty denies access to everyone except admins
|
| |
- If you got this far, access is PERMITTED
Access Control quick recipes |